| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper state validation in FileSystem in Google Chrome prior to 157.0.8103.38 allowed a remote attacker leveraging social engineering to bypass system access restrictions via a crafted HTML page. (Chromium security severity: Medium) |
| Improper state validation in Performance in Google Chrome prior to 156.0.8078.47 allowed a local attacker to read memory via a local program. (Chromium security severity: Medium) |
| A vulnerability in the CLI of Cisco IOS XE Software could allow an authenticated, local attacker with privilege level 15 to elevate privileges to root on the underlying operating system of an affected device.
This vulnerability is due to insufficient input validation when processing specific configuration commands. An attacker could exploit this vulnerability by including crafted input in specific configuration commands. A successful exploit could allow the attacker to elevate privileges to root on the underlying operating system of an affected device. The security impact rating (SIR) of this advisory has been raised to High because an attacker could gain access to the underlying operating system of the affected device and perform potentially undetected actions.
Note: The attacker must have privileges to enter configuration mode on the affected device. This is usually referred to as privilege level 15. |
| darylldoyle svg-sanitizer from 1.0.0 before 1.1.0 contains a regular expression denial of service vulnerability in the image-set pattern of stripRemoteCssTokens() when removeRemoteReferences is enabled. Attackers can submit SVGs with many unclosed image-set tokens to exhaust CPU, or trigger PCRE limits causing sanitize() to throw a TypeError and leave unsanitized content. |
| In multiple locations, there is a possible denial of service due to a logic error in the code. This could lead to remote denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In multiple locations, there is a possible permission bypass due to a missing permission check. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. |
| Improper Check for Unusual or Exceptional Conditions vulnerability in the pattern and patternProperties keywords in lud jsv allows an unauthenticated remote attacker to bypass schema validation via a string that matches a schema regex only after heavy backtracking. JSV.Helpers.RegexExt.bounded_match?/2 runs schema regexes with a backtracking budget but calls :re.run/3 without :report_errors, so a match that exhausts the budget returns the same :nomatch as a real non-match. A key that matches a patternProperties regex is then checked against additionalProperties or not at all, and a string that matches a not subschema with a pattern is accepted. Before the budget existed, Regex.match?/2 failed the same way at Erlang's default match limit.
Only schemas whose regex explores a catastrophic branch before the branch that matches are affected. The attacker controls the data, not the schema, and linear patterns never exhaust the budget.
This issue affects jsv: from 0.1.0 before 0.26.2. |
| Mattermost versions 11.7.x <= 11.7.11 fail to validate null elements when decoding playbook import conditions which allows an authenticated attacker to crash the Playbooks plugin instance-wide via a crafted import request containing a null condition. Mattermost Advisory ID: MMSA-2026-00709 |
| In Modem, there is a possible information disclosure due to side channel information disclosure. This could lead to remote denial of service, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01879164; Issue ID: MSV-9846. |
| A flaw in the Node.js `zlib.ZipFile` API can cause it to return bytes that do not belong to the requested entry after the local and central header validation fails.
When `zipEntry.modified` is read on an archive whose local header does not match its central directory, either directly or while compacting the archive, the validation error is caught but the parsed local header is left cached without a content offset. A later content read then returns attacker-controlled bytes from the start of the file instead of rejecting the archive, and CRC-32 verification still passes because the attacker controls the central directory CRC. A Node.js-based scanner can therefore approve different content from what another ZIP implementation extracts from the same archive.
This vulnerability affects Node.js **26.x**. |
| PHP has various global state that temporarily points into request memory. In some scenarios, global state may not be correctly reset, or may be repopulated after being reset. The global state may then refer to request memory even after it has been freed. Subsequent requests may read or branch on this stale state before it is fully initialized. Multiple strategies can trigger this condition and produce remote code execution (RCE). |
| PHP uses longjmp() for out-of-memory (OOM) errors to exit the current context and abort handling of the request. Some contexts may not properly account for this scenario and leave request memory in an uninitialized state before performing an allocation. The subsequent request cleanup procedure may read or branch on this memory. Multiple OOM strategies can consistently trigger this condition and lead to remote code execution (RCE). |
| In the RingRTC library before 2.72.0 for Signal, a peer that saturates a call's FSM queue can interfere with the ability of a local hangup to tear the call (with its audio and perhaps also video track) down. |
| Improper Check for Unusual or Exceptional Conditions vulnerability in Drupal Permissions by Term allows Forceful Browsing. This issue affects Permissions by Term versions: from 0.0.0 to 3.1.41. |
| CallBackery versions before 0.62.0 for Perl store user passwords as unsalted HMAC-SHA1 hashes.
Passwords are hashed with hmac_sha1_sum() from Mojo::Util with no key, a single fast SHA-1 HMAC. There is no salt, so equal passwords give equal hashes, and no work factor slows down guessing.
An attacker who obtains the user table can recover passwords by fast offline guessing. |
| OpenVM is a performant and modular zkVM framework built for customization and extensibility. Before 1.7.0 in the 1.x line and in affected 2.0 and 2.1 prereleases, `OpenVmHalo2Verifier.verify` constructs raw proof calldata from user-controlled `proofData`, performs a `staticcall` to `address(this)`, and treats a successful call as proof acceptance. If the first four proof bytes match another external selector exposed by the wrapper, dispatch can invoke a successful non-verifier function instead of the generated Halo2 fallback verifier. Applications using the generated Solidity wrapper can consequently accept arbitrary app commitments and public values without checking the proof suffix, accumulator, app commitments or public values. This issue is fixed in versions 1.7.0, 2.0.0-rc.3 and 2.1.0-preview. |
| In the Linux kernel, the following vulnerability has been resolved:
tty: vcc: zero-initialize control packet in vcc_send_ctl()
The stack-allocated struct vio_vcc pkt was partially initialized,
leaving the tag.stype_env field uninitialized before being sent via
ldc_write(), potentially leaking kernel stack data to the LDC peer. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Clear buf on error in __bpf_get_task_stack
Both bpf_get_task_stack and bpf_get_task_stack_sleepable helpers that
use __bpf_get_task_stack have buf defined as ARG_PTR_TO_UNINIT_MEM
argument and we should initialize the buf on every return path.
Adding missing buf memset for __bpf_get_task_stack fail paths. This
provides deterministic buffer contents, which is useful when the buffer
is used directly as a map key. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: do not leak an hci_conn when a second LE connect is rejected
create_le_conn_complete() decides whether the failed connection is
still pending by comparing it against hci_lookup_le_connect(), which
returns the first LE connection in BT_CONNECT. That is the same
connection only while at most one is pending.
Two can be pending. Connections created on the passive scan path sit
in BT_CONNECT with HCI_CONN_SCANNING set and are invisible to
hci_lookup_le_connect() until hci_le_create_conn_sync() clears the
flag when their command is issued, so the -EBUSY guard in
hci_connect_le() does not prevent a second connection from being
queued while the first is still on the scan path. Whenever two
connections are in BT_CONNECT at once, the lookup may return one
connection while create_le_conn_complete() is reporting the failure
of the other; the early exit then drops the error and hci_conn_failed()
never runs on the connection that failed.
The controller also rejects a second HCI_OP_LE_CREATE_CONN issued
while another connection creation is still outstanding, per Core Spec
Vol 4, Part E. The spec calls for Command Disallowed there; the
bcm43438 observed here answers with an LMP/LL error code instead,
which bt_to_errno() maps to the -EPROTO (-71) in the log below.
The leaked connection stays in BT_CONNECT forever, and because
hci_connect_le() refuses to dial while hci_lookup_le_connect() finds
anything, every subsequent attempt to reach any peer fails with
-EBUSY and no command reaches the controller at all.
Seen on a bcm43438 with two BLE peers polled on the same interval
(state 5 is BT_CONNECT; both handles are UNSET ones, allocated from
the ida above HCI_CONN_HANDLE_MAX):
Bluetooth: hci1: Opcode 0x2013 failed: -71
# hcitool con
< LE 14:9C:EF:03:68:81 handle 3840 state 5 lm CENTRAL
< LE C4:D3:6A:8C:B5:38 handle 3841 state 5 lm CENTRAL
A btmon capture across the next ten minutes of connect attempts
contains no HCI_OP_LE_CREATE_CONN at all; outgoing LE connections
do not recover until the adapter is reset. With this change the same
scenario fails the rejected connection cleanly and further connects
to both peers go through.
Ask about the connection itself instead of about the device. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: TC, Check if flow is PEER before acquiring devcom lock
In case __mlx5e_add_fdb_flow() fails in lower levels, the flow is
deleted via mlx5e_tc_del_flow(), and mlx5e_tc_del_flow() is acquiring
ESW devcom lock without condition. In addition, in case of peer_flow,
__mlx5e_add_fdb_flow() is called while holding ESW devcom comp lock.
This results in an AA deadlock.
To fix this, introduce a new PEER flag that is set on flows created as
peer flows (the duplicate flows on peer devices), and check it in
mlx5e_tc_del_flow() before acquiring ESW devcom lock.
Lockdep splat:
============================================
WARNING: possible recursive locking detected
============================================
Possible unsafe locking scenario:
CPU0
----
lock(&comp->lock_key#2);
lock(&comp->lock_key#2);
*** DEADLOCK ***
Call Trace:
<TASK>
dump_stack_lvl+0x69/0xa0
print_deadlock_bug.cold+0xbd/0xca
__lock_acquire+0x1671/0x2ec0
lock_acquire+0x10e/0x2e0
down_read+0x95/0x430
mlx5_devcom_for_each_peer_begin+0x4e/0xe0 [mlx5_core]
mlx5e_tc_del_flow+0x11d/0xa70 [mlx5_core]
mlx5e_flow_put+0x99/0x100 [mlx5_core]
__mlx5e_add_fdb_flow+0x409/0xf00 [mlx5_core]
mlx5e_configure_flower+0x2a86/0x4100 [mlx5_core]
mlx5e_rep_setup_tc_cls_flower+0x12f/0x1b0 [mlx5_core]
mlx5e_rep_setup_tc_cb+0x153/0x750 [mlx5_core]
tc_setup_cb_add+0x1dc/0x470
fl_change+0x2f4d/0x626d [cls_flower]
tc_new_tfilter+0x79b/0x2310
rtnetlink_rcv_msg+0x778/0xad0
do_syscall_64+0x70/0x960
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK> |
