| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Pillow is a Python imaging library. From 5.1.0 until 13.0.0, Pillow's PdfParser.get_value() can recurse without a limit while reading nested PDF objects. The parser follows attacker-controlled arrays and dictionaries when an existing PDF is opened for append. An attacker can provide a deeply nested PDF to an application that saves an image with PDF append enabled. This can raise an uncaught RecursionError or terminate the worker, causing denial of service. This issue is fixed in version 13.0.0. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: xilinx: fix runtime PM leak on request error path
pm_runtime_get_sync() leaves the usage counter incremented even when it
fails, and xgpio_request() returns the error without dropping it.
gpiolib does not call ->free() when ->request() fails, so xgpio_free(),
which holds the only matching pm_runtime_put(), never runs. The reference
is leaked and the controller can no longer runtime-suspend, so its clock
stays enabled.
Switch to pm_runtime_resume_and_get(), which only increments the usage
counter on success. |
| In the Linux kernel, the following vulnerability has been resolved:
mlxsw: spectrum_flower: Fix port range register leak in tmplt_create()
mlxsw_sp_flower_tmplt_create() parses a flow_cls_offload template
into a stack-local struct mlxsw_sp_acl_rule_info purely to compute
rulei.values.elusage. Parsing can acquire port range registers via
mlxsw_sp_flower_parse_ports_range(), but since this rulei never goes
through mlxsw_sp_acl_rulei_destroy(), those registers were never
released, including through chain template deletion.
Factor out of mlxsw_sp_acl_rulei_destroy() the code to actually
release the necessary resources and call from
mlxsw_sp_flower_tmplt_create() to plug the leak.
The issue was found during a review of Wentao Liang's patch referenced
below. |
| Allocation of resources without limits or throttling in Windows SMB Server allows an unauthorized attacker to deny service over a network. |
| pupnp is an SDK for development of UPnP device and control point applications. Prior to 2.0.2, Transfer-Encoding: chunked causes the HTTP parser in upnp/src/genlib/net/http/httpparser.c to leave parser->content_length at zero while parser_parse_chunky_entity and parser_parse_chunky_body accumulate decoded bytes in parser->msg.entity. The g_maxContentLength checks in http_RecvMessage in upnp/src/genlib/net/http/httpreadwrite.c therefore reject oversized numeric Content-Length bodies but do not enforce the same limit on decoded chunked bodies. A remote peer that can reach a SOAP, GENA, miniserver, or control-point HTTP response path can make the process buffer an entity larger than the configured maximum, causing resource exhaustion and denial of service. This issue is fixed in 2.0.2. |
| Ghidra before 12.2 contains a resource allocation without limits vulnerability in FileSystemIndexHelper used by TarFileSystem and ZipFileSystem, which store unbounded archive entries. Attackers can persuade a user to open or batch-import a crafted TAR or ZIP archive with excessive entries to exhaust the Java heap and hang the session. |
| Wasmtime 47.0.0 before 48.0.3 and 49.0.0 before 49.0.1 contains a fuel accounting flaw in Cranelift-compiled call_ref and try_table catch paths. Malicious guests can reset consumed fuel after calls to run exponentially long on linear fuel, evading timeouts and periodic yields for denial of service. |
| Mattermost versions 11.10.x <= 11.10.0, 11.7.x <= 11.7.9, 11.9.x <= 11.9.1, 11.8.x <= 11.8.5 fail to limit the size of remote image responses buffered in memory during local image proxy direct fetches, which allows a remote attacker to cause memory exhaustion on the server via a crafted oversized image response.. Mattermost Advisory ID: MMSA-2026-00726 |
| Part-DB is an open source inventory management system for electronic components. Prior to version 2.13.2, Part-DB allows authenticated users to bypass the configured maximum attachment file size when using the server-side “Download external file” attachment feature. When server-side attachment downloads are enabled, Part-DB downloads the remote file and streams it directly to disk without enforcing the configured MAX_ATTACHMENT_FILE_SIZE limit. As a result, an authenticated user who can create or edit attachments can cause Part-DB to store files larger than the configured maximum attachment size, potentially exhausting disk space and causing a denial of service. This issue has been patched in version 2.13.2. |
| Part-DB is an open source inventory management system for electronic components. Prior to version 2.13.2, Part-DB allows authenticated API users to bypass the configured maximum attachment file size by uploading attachments through the API using base64-encoded file data. The application enforces the configured attachment size limit for normal browser-based file uploads, but the API base64 upload path does not apply the same size validation. As a result, an authenticated user with API access and permission to create attachments can upload files larger than the configured maximum attachment size, potentially exhausting disk space and causing a denial of service. This issue has been patched in version 2.13.2. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: ma35d1: Fix clock reference leak in ma35d1serial_probe()
of_clk_get() returns a clock with a reference that has to be released
with clk_put(). ma35d1serial_probe() never does that, so the reference
is leaked on the probe error paths and also when the port is removed.
Release it on the error paths and in ma35d1serial_remove(). |
| cleanup_xml_node() in the SOAP XML parser recurses once per XML nesting level with no depth limit. An unauthenticated attacker can post a SOAP request containing tens of thousands of nested elements to any SoapServer endpoint, exhaust the stack and crash the process. The same unbounded recursion exists in the SOAP value decoder and in the WSDL node search helper. |
| undici is an HTTP client library for Node.js. In versions 6.5.0 through 6.29.0, 7.0.0 through 7.30.0, and 8.0.0 through 8.12.1, its EventSource client can be driven to exhaust process memory by a malicious or compromised Server-Sent Events peer. By sending millions of tiny completed data fields with no blank event separator, or a single unfinished line split across many chunks, the parser retains a growing amount of per-field and per-chunk state that the byte-based maxEventSize and maxResponseSize limits do not bound, and because maxResponseSize is enforced on the compressed body before decompression, a small compressed response can expand into enough retained memory to terminate the process. An application only needs to maintain an EventSource connection to an untrusted peer, which controls only the response, and availability is the only impact. The issue is fixed in undici 6.29.1, 7.30.1, and 8.12.2, which bound the retained parser state independently of the byte limits, and users should upgrade to one of those versions or later. There is no workaround. |
| react/http is an event-driven, streaming HTTP client and server implementation for ReactPHP. From 1.0.0 until 1.11.1, React\Http\Browser uses ClientRequestStream::handleData() to append response-header bytes to an internal buffer without enforcing a size limit. A remote server can send a valid status line and partial header, withhold the \r\n\r\n or \n\n header terminator, and continue streaming data so the buffer grows for the life of the connection. Applications that fetch attacker-controlled or attacker-influenced URLs, including URLs reached through redirects, can exhaust PHP memory_limit and crash the event-loop or worker process. Confidentiality and integrity are unaffected. This issue is fixed in version 1.11.1. |
| undici is an HTTP client library for Node.js. In versions 5.15.0 through 6.29.0, 7.0.0 through 7.30.0, and 8.0.0 through 8.12.1, its WebSocket client, including the bundled WebSocket exposed by Node.js, can be driven to exhaust process memory by a malicious or compromised WebSocket server. For every PING frame received, the client automatically writes a PONG response and ignores the backpressure signal from the socket write, so a server that streams small PING frames while never reading the client's PONGs makes the outbound write queue and heap grow without bound until the Node.js process runs out of memory and terminates. The attack is remote and unauthenticated, needs only a normal WebSocket connection, and is asymmetric, since small inbound PINGs produce a much larger retained outbound queue, with availability the only impact. The issue is fixed in undici 6.29.1, 7.30.1, and 8.12.2, which pause WebSocket frame parsing when the automatic PONG response hits socket backpressure and resume on drain, bounding the outbound queue, and users should upgrade to one of those versions or later. There is no workaround. |
| kin-openapi is a Go project for handling OpenAPI files. From 0.145.0 until 0.146.0, openapi3filter repeatedly calls regexp.MustCompile for the same parameter-name regular expression inside the per-query-key loop in urlValuesDecoder.DecodeObject used to decode a deepObject query parameter. An unauthenticated remote client can send an affected endpoint a request containing many unrelated query keys, causing ValidateRequest to perform work and allocations proportional to the attacker-controlled key count for every deepObject parameter. The expression itself is fixed and this is not regular expression denial of service; the resource consumption comes from loop-invariant recompilation. This issue is fixed in version 0.146.0. |
| Lychee is a free, open-source photo-management tool. Prior to 7.7.0, Lychee enables ImageMagick PDF support with Ghostscript but does not apply an effective pre-render limit to PDF page dimensions in ImagickHandler::loadPdf(). An authenticated user who can upload a small PDF with an oversized /MediaBox can cause Imagick::readImage() to consume substantial CPU before failing to produce an image. When QUEUE_CONNECTION selects synchronous processing the request can occupy a web worker, while the official asynchronous Docker configuration can clog the shared image-processing queue and delay other work. The advisory did not identify a Ghostscript sandbox escape. This issue is fixed in version 7.7.0. |
| Lychee is a free, open-source photo-management tool. Prior to 7.7.0, GET /docs/api exposes the Scramble-generated OpenAPI documentation configured by config/scramble.php to unauthenticated callers after installation, with observed response size and latency suggesting that the schema is regenerated without an application-level cache. A remote attacker can repeatedly request the unthrottled route to consume server CPU and obtain a detailed map of the API surface and parameter schema. This issue is fixed in version 7.7.0. |
| The WP Photo Album Plus plugin for WordPress is vulnerable to authenticated Command Injection in all versions up to, and including, 9.3.02.002 via the `value` parameter of the `update-photo` AJAX action. This is due to insufficient shell escaping within the `wppa_image_magick_a()` function, where the attacker-controlled `value` parameter is concatenated raw — without `escapeshellarg()` — into an ImageMagick command string before being passed to `exec()`; further, `wppa_decode()` actively restores percent-encoded shell metacharacters (e.g., `%26`→`&`, `%23`→`#`) rather than stripping them, allowing crafted payloads to survive sanitization and break out of the ImageMagick argument context. This makes it possible for authenticated attackers holding the plugin-defined `wppa_upload` capability to execute arbitrary operating-system commands as the web-server user, achieving full remote code execution on the underlying server. Exploitation requires ImageMagick to be enabled on the server; the `wppa_upload` capability is a plugin-level privilege that site administrators may grant to lower-privileged WordPress roles via the plugin's Users settings, broadening the pool of potential attackers beyond administrators. |
| In the Linux kernel, the following vulnerability has been resolved:
net: can: j1939: j1939_xtp_rx_rts_session_active(): deactivate session upon receiving the second rts
Since j1939_session_deactivate_activate_next() in j1939_tp_rxtimer() is
called only when the timer is enabled, we need to call
j1939_session_deactivate_activate_next() if we cancelled the timer.
Otherwise, refcount for j1939_session leaks, which will later appear as
| unregister_netdevice: waiting for vcan0 to become free. Usage count = 2.
problem. |
