| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Correctly cap ZCR_EL2 provided by a guest hypervisor
ZCR_EL2 can be updated by a VHE guest hypervisor either using ZCR_EL2
(which traps) or ZCR_EL1 (which does not trap). KVM handles both in
different way:
- on ZCR_EL2 trap, ZCR_EL2.LEN is immediately capped at the VM's own
VL limit. This has the potential to break existing SW that relies
on the full LEN field to be stateful.
- on ZCR_EL1 access, we do absolutely nothing.
On restoring the SVE context for an L2 guest, we directly restore the
guest hypervisor's view of ZCR_EL2 into the physical ZCR_EL2. If the
guest's view of the register was updated using the ZCR_EL2 accessor,
the value has already been sanitised (with the caveat mentioned above).
But if the guest used ZCR_EL1, the raw value is written into the HW,
and the L2 guest can now access VLs that it shouldn't.
Fix all the above by moving the VL capping to the restore points,
ensuring that:
- the HW is always programmed with a capped value, irrespective of
the accessor being used,
- the ZCR_EL2.LEN field is always completely stateful, irrespective
of the accessor being used.
Additionally, move ZCR_EL2 to be a sanitised register, ensuring that
only the LEN field is actually stateful. This requires some creative
construction of the RES0 mask, as the sysreg generation script does
not yet generate RAZ/WI fields.
[maz: rewrote commit message, tidy up access_zcr_el2()] |
| Incorrect Privilege Assignment vulnerability in Cozmoslabs Profile Builder profile-builder allows Privilege Escalation.This issue affects Profile Builder: from n/a through 4.0.4. |
| A vulnerability was detected in HarnessRouter up to 0.31.10. This affects an unknown function of the file gateway/app.py of the component Identity Mode. Performing a manipulation of the argument X-Harness-Org/X-Harness-Member results in improper authorization. The attack is possible to be carried out remotely. The attack is considered to have high complexity. The exploitability is reported as difficult. Upgrading to version 0.31.11 mitigates this issue. The patch is named 48a26cdf9c4544d2c88d1a07f0777f063f1d753f. The affected component should be upgraded. |
| Incorrect Privilege Assignment vulnerability in Hamid Alinia Login with phone number login-with-phone-number allows Privilege Escalation.This issue affects Login with phone number: from n/a through 1.8.77. |
| A weakness has been identified in dhikshitha29 Insurance-Management-System 91de5edda5baa109ad8e9baf03ce6a3ceda84183/125362cc21dca20d74091a4913a5096bb58dd837. Affected by this issue is some unknown functionality of the file /Admin/includes/Admin-Register-inc.php of the component Add New Admin Form. Executing a manipulation of the argument submit/Admin_id/password can lead to improper authorization. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks. This product utilizes a rolling release system for continuous delivery, and as such, version information for affected or updated releases is not disclosed. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability was detected in dhikshitha29 Insurance-Management-System 91de5edda5baa109ad8e9baf03ce6a3ceda84183/125362cc21dca20d74091a4913a5096bb58dd837. This vulnerability affects unknown code of the file /Agent/includes/UpdatePolicyHolder-inc.php of the component Policy Holder Update Form. The manipulation of the argument Policy_no results in improper authorization. It is possible to launch the attack remotely. The exploit is now public and may be used. This product takes the approach of rolling releases to provide continious delivery. Therefore, version details for affected and updated releases are not available. The project was informed of the problem early through an issue report but has not responded yet. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix maximum allowed access checks
The DACL permission check looks for an ACE matching the current user and
falls back to the Everyone ACE. It does not consider an Authenticated
Users ACE, even though an authenticated session is a member of that
well-known group.
As a result, opening a file whose access is granted through S-1-5-11 can
incorrectly fail with STATUS_ACCESS_DENIED. Treat an Authenticated Users
ACE as a fallback entry alongside Everyone.
The maximal access calculation also combines access masks from every ACE,
regardless of whether its SID applies to the current user. This can grant
rights belonging to an unrelated principal. Process only ACEs applying to
the user, Everyone, or Authenticated Users, and accumulate allowed and
denied masks in ACL order. Preserve explicitly requested access bits so
they are validated against the resulting maximal mask.
When ACCESS_SYSTEM_SECURITY is denied, report STATUS_PRIVILEGE_NOT_HELD
instead of the generic STATUS_ACCESS_DENIED. Access to the system ACL
requires a security privilege that ksmbd does not grant.
For regular files, include FILE_EXECUTE in maximal access when the client
requested GENERIC_EXECUTE and the DACL grants the complete file-read set.
Keep a direct FILE_EXECUTE request subject to the explicit DACL bit. This
matches the POSIX file ACL mapping without broadening specific execute
requests.
Do not replace rights from an applicable NT ACE with a POSIX ACL entry.
The POSIX ACL is only a fallback when no user, Everyone, or Authenticated
Users ACE applies; otherwise it can incorrectly broaden the stored DACL.
This fixes smb2.maximum_allowed.maximum_allowed. |
| In the Linux kernel, the following vulnerability has been resolved:
ovl: check access to copy_file_range source with src mounter creds
Commit 5dae222a5ff0c ("vfs: allow copy_file_range to copy across devices")
allowed filesystems that implement the copy_file_range() f_op to decide
if they want to access cross-sb copy from/to the same fs type.
The same commit added checks to verify same sb copy for filesystems that
implement ->copy_file_range() and do not support cross-sb copy at the
time, namely, to ceph, fuse and nfs.
The two remaining fs which implement ->copy_file_range(), cifs and
overlayfs started to support cross-sb copy from this time.
While overlayfs does support cross-sb copy when the two underlying files
are on the same base fs, the copy operation on the two real files from
two different overalyfs filesystems is performed with the mounter
creds of the destination overlayfs and the read permission access hook
for the source file was called with the wrong creds.
This could cause either deny of access to copy which would otherwise be
allowed (e.g. with splice) or allow read access to file which would
otherwise be denied.
Fix the latter case by explicitly verifying read access to source file
with the source overlayfs mounter creds.
The former case remains a quirk of cross-sb overlayfs copy, but
userspace could fall back to regular copy so no harm done. |
| A vulnerability was found in Open5GS up to 2.7.6. This impacts the function ran_ue_find_by_amf_ue_ngap_id of the file src/amf/context.c of the component AMF/MME. Performing a manipulation results in improper authorization. It is possible to initiate the attack remotely. The exploit has been made public and could be used. The patch is named 5746b8576cfceec18ed87eb7d8cf11b1fb4cd8b1. It is suggested to install a patch to address this issue. |
| A vulnerability was determined in Eleveo Call Recording Software 9.7.0. This affects an unknown part of the file /callrec/searchAction.do of the component Query Builder. This manipulation causes improper access controls. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. |
| A security vulnerability has been detected in Portabilis i-Educar up to 2.9.10. Affected by this issue is some unknown functionality of the file app/Http/Controllers/AccessLevelController.php of the component User Type Handler. The manipulation leads to insecure inherited permissions. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used. Upgrading to version 2.12 can resolve this issue. The identifier of the patch is d53365e5656f6499a4deddf89d522814655f769d. It is advisable to upgrade the affected component. |
| A vulnerability has been found in Portabilis i-Educar up to 2.10. This vulnerability affects unknown code of the file /cancelar-enturmacao-em-lote/. Such manipulation leads to improper access controls. The attack may be performed from remote. The exploit has been disclosed to the public and may be used. Upgrading to version 2.12 is able to resolve this issue. The name of the patch is d53365e5656f6499a4deddf89d522814655f769d. The affected component should be upgraded. |
| A flaw has been found in Portabilis i-Educar up to 2.10. This affects an unknown part of the file /enturmacao-em-lote/. This manipulation causes improper access controls. The attack is possible to be carried out remotely. The exploit has been published and may be used. Upgrading to version 2.12 is able to mitigate this issue. Patch name: d53365e5656f6499a4deddf89d522814655f769d. You should upgrade the affected component. |
| A vulnerability was detected in Portabilis i-Educar up to 2.10. This affects an unknown function of the file /exportacao-para-o-seb. Performing a manipulation results in improper access controls. The attack is possible to be carried out remotely. The exploit is now public and may be used. Upgrading to version 2.12 mitigates this issue. The patch is named d53365e5656f6499a4deddf89d522814655f769d. You should upgrade the affected component. |
| Incorrect privilege assignment in the IAM policy of AWS CICD-toolchain-for-serverless-applications 1.0.7 through 1.0.10 allows remote authenticated users with push access to the application source repository to escalate privileges and access or modify resources outside the application stack in the same AWS account via application templates deployed by the toolchain pipeline.
To remediate this issue, users should upgrade existing toolchain stacks to version 1.0.11 or later. |
| Incorrect privilege assignment in Temporary Elevated Access Management (TEAM) for AWS IAM Identity Center solution before version 1.5.1 might allow an authenticated remote user with application-level access to read, approve, modify, or revoke arbitrary access requests, thereby obtaining unintended temporary elevated access to the AWS accounts accessed using the TEAM deployment.
This issue has been addressed in TEAM version 1.5.1 or later. We recommend upgrading to the latest version and ensuring any forked or derivative code is patched to incorporate the new fixes. |
| A vulnerability was found in aaPanel up to 8.25.0. The impacted element is the function GetClientIp of the file class/public/common.py. The manipulation of the argument X-Real-Ip results in improper access controls. The attack may be performed from remote. The exploit has been made public and could be used. The vendor confirms: "The reported X-Real-Ip IP-bypass vulnerability has already been fixed". |
| MariaDB server is a community developed fork of MySQL server. From 10.6.1 until 10.6.28, 10.11.19, 11.4.13, 11.8.9, 12.3.3, and 13.0.2, the GRANT PROXY statement treats an IDENTIFIED clause with an empty password as though authentication were not specified, causing it to check the wrong grantor privileges. A low-privileged attacker who can name another account can exploit this authorization error to set that account's password. This issue is fixed in versions 10.6.28, 10.11.19, 11.4.13, 11.8.9, 12.3.3, and 13.0.2. |
| In the Linux kernel, the following vulnerability has been resolved:
net: sit: require CAP_NET_ADMIN in the device netns for changelink
ipip6_changelink() operates on at most two netns, dev_net(dev) and the
tunnel link netns t->net. They differ once the device is created in or
moved to a netns other than the one the request runs in. The rtnl
changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a
caller privileged there but not in t->net can rewrite a tunnel that
lives in t->net.
Gate ipip6_changelink() on rtnl_dev_link_net_capable() at its top,
before any attribute is parsed. sit was the one tunnel type not covered
by the recent series that added this check to the other changelink()
handlers. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ip6_gre: require CAP_NET_ADMIN in the device netns for changelink
ip6gre_changelink() and ip6erspan_changelink() operate on at most two
netns, dev_net(dev) and the tunnel link netns t->net. They differ once
the device is created in or moved to a netns other than the one the
request runs in. The rtnl changelink path checks CAP_NET_ADMIN only
against dev_net(dev), so a caller privileged there but not in t->net can
rewrite a tunnel that lives in t->net.
Gate both ops on rtnl_dev_link_net_capable() at their top, before any
attribute is parsed. |
