| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
statmount: read the parent of an unmounted mount under mount_lock
statmount_mnt_basic() reads the ids of the parent through m->mnt_parent
with namespace_sem held for reading. That's fine for a mount that is
in a namespace. Everything above it is pinned by that namespace.
STATMOUNT_BY_FD also accepts a file descriptor on a mount that has
been unmounted on purpose and that only the file descriptor keeps alive.
If that mount stayed attached to its parent when it was unmounted the
parent is unmounted as well and nothing pins it for the child.
The final mntput() unmounts the children under mount_lock alone and
frees the parent afterwards. Concurrently, statmount_mnt_basic() reads
m->mnt_parent twice while that can happen and can easily dereference a
mount that's already gone.
Read the parent of an unmounted mount under mount_lock. The parent
can't be put while it is held and both ids come from the same mount. A
mounted mount's parent is pinned by the namespace and a mount can't
leave its namespace while namespace_sem is held, so the common case
takes no global lock. |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: reset the old parent's ->overmount in mnt_change_mountpoint()
__umount_mnt() resets ->overmount of the parent when it unmounts the
mount that overmounts it. mnt_change_mountpoint() doesn't. It moves the
mount to its new parent and leaves the old one pointing at it.
For a mount that is moved beneath in attach_recursive_mnt() that doesn't
matter. The new mount has already reset ->overmount of the old parent by
the time the old top mount is moved onto it.
It matters for reparent() though. propagate_umount() moves a surviving
overmount onto the first ancestor that isn't going to be unmounted. The
mount it was taken from is unmounted immediately afterwards. If a file
descriptor keeps that unmounted mount alive ->overmount points at the
moved mount. That's a dangling pointer and UAF as the moved mount is
unmounted and freed.
do_lock_mount() follows ->overmount from the target path under
mount_lock. With a file descriptor on such a mount as the target of a
mount beneath topmost_overmount() walks into the freed mount and
do_lock_mount() takes references on whatever it finds there.
So reset ->overmount of the old parent in mnt_change_mountpoint() the
same way __umount_mnt() does. A mount's ->overmount is then always a
mount that is attached to it. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/gem: Prevent overstepping exec array boundary
It is possible for eb_relocate_parse_slow() to call kvfree() on
entries outside the original exec array during following
scenario inside eb_relocate_parse_slow():
1) eb_copy_relocations() allocates as many as eb->buffer_count
copies for exec entries;
2) eb_parse() appends up to two VMAs, right after incrementing
eb->buffer_count;
3) cleanup under "out" label uses this incremented buffer_count
to release relocation pointers from exec array via kvfree(),
not from VMA array.
To amend this problem, ensure that relocation cleanup uses the
original exec object count, excluding the VMAs appended by the
command parser.
(cherry picked from commit 2a0158925fb943c7ba8f3216e2734952128defc9) |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: Serialize concurrent connect calls
iso_sock_connect() checks the socket state before taking the socket lock
and drops the lock again before setting up a connection. Two callers can
both pass the admission check while the socket is open or bound.
Caller A can copy its destination for route selection, then caller B can
replace the socket destination before A binds or connects the CIS. A
then uses B's destination with the route selected for its own request.
B can also proceed after A attaches a connection and sets BT_CONNECT.
For deferred BIS setup, B can bind a second BIS and overwrite
iso_pi(sk)->conn, leaving the first connection's reference and conn->sk
back-pointer stranded. Concurrent CIS connects can likewise replace the
socket's connection. Later teardown only detaches the current connection,
so a callback on the old connection can race with socket release and
access a freed socket.
KASAN reported:
BUG: KASAN: slab-use-after-free in iso_sock_hold+0xf7/0x1b0
Call Trace:
iso_sock_hold+0xf7/0x1b0
iso_conn_del+0x7b/0x1d0
iso_connect_cfm+0x186/0x16a0
hci_conn_failed+0x154/0x280
hci_abort_conn_sync+0x3dc/0x7d0
hci_cmd_sync_work+0x173/0x300
Allocated by task 121:
sk_alloc+0x2b/0x6d0
bt_sock_alloc+0x29/0x370
iso_sock_alloc.constprop.0+0x19/0x300
iso_sock_create+0x94/0x100
Freed by task 121:
kfree+0x121/0x3c0
__sk_destruct+0x42b/0x540
iso_sock_release+0x29d/0x340
__sock_release+0xa1/0x260
Check admission under the socket lock and mark the connect operation in
progress before publishing its destination. Keep that flag set across
route lookup and connection setup, rejecting another connect with
-EBADFD before it can change the destination or attach a connection.
Clear the flag after either helper returns, including on failure, so a
failed setup can be retried.
A separate flag is needed because the socket lock must be released before
acquiring the HCI device lock, while BT_CONNECT requires an attached
connection. Keep the existing state transitions and the deferred CIS
completion through iso_sock_recvmsg().
Reject an existing socket attachment in __iso_chan_add() before taking
a new reference or publishing either pointer, so every caller preserves
the connection association. Keep the same-socket, same-connection success
case for deferred CIS setup. Reject an attached socket before BIS setup
so a reusable BIS is not claimed before the attachment is rejected.
In CIS setup, reject a different HCI connection before iso_conn_add()
and drop the per-attempt HCI hold directly. An unowned iso_conn may still
carry another reference after detachment, so its destruction cannot be
relied on to release that hold.
iso_listen_bis() creates a fresh PA HCI/ISO pair under the device lock,
so the temporary iso_conn_put() frees the ISO candidate and drops its
HCI hold on rejection. iso_conn_ready() uses a freshly allocated,
unpublished child with no connection, making the socket-side rejection
unreachable. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: Reject concurrent BIS listener setup
iso_sock_listen() drops the socket lock before calling iso_listen_bis()
to preserve the hdev->lock ordering. Two concurrent listen() calls on
the same broadcast socket can therefore both observe BT_BOUND. Caller
A can attach connA and release the locks, then caller B can acquire
them and attach connB before A publishes BT_LISTEN.
__iso_chan_add() checks whether connB already has a socket, but not
whether the socket already has a connection. The second attachment
overwrites iso_pi(sk)->conn, leaking the connA reference and leaving
connA->sk intact. Socket teardown follows connB, so later events on
connA can cause a stale socket access.
Recheck BT_BOUND and require iso_pi(sk)->conn to be NULL after taking
both the HCI device and socket locks in iso_listen_bis(). The connection
check also covers the interval between attachment and publication of
BT_LISTEN. Reject a competing setup with -EBADFD through the existing
unlock path before allocating another connection.
A recorded KASAN report from an instrumented kernel shows:
BUG: KASAN: slab-use-after-free in iso_sock_hold+0x119/0x1f0
Call Trace:
iso_sock_hold+0x119/0x1f0
iso_conn_del+0xe4/0x270
hci_disconn_complete_evt+0x351/0x8c0
hci_event_packet+0x71b/0xb20
hci_rx_work+0x293/0x730
Allocated by task 93:
sk_prot_alloc+0x113/0x220
sk_alloc+0x2b/0x6d0
bt_sock_alloc+0x29/0x370
iso_sock_alloc.constprop.0+0x19/0x300
iso_sock_create+0x94/0x100
Freed by task 93:
kfree+0x121/0x3c0
__sk_destruct+0x42b/0x540
iso_sock_release+0x29d/0x340
__sock_release+0xa1/0x260
sock_close+0x10/0x20 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: Fix command skb lifetime during scan setup
During PA sync scan setup, hci_le_set_ext_scan_param_sync() gets the
address used for the PA_LINK lookup from hci_sent_cmd_data(). The
returned pointer borrows storage from sent_cmd or req_skb, without
holding a reference to either skb.
The scan worker runs on req_workqueue while hci_cmd_work() runs on the
separate device workqueue. After the scan worker loads sent_cmd, the
command worker can free and replace it before hci_sent_cmd_data()
dereferences the skb. The command payload can also be freed between
returning from the helper and comparing the address. The connection
lookup's RCU critical section does not protect the command skb.
KASAN reported:
BUG: KASAN: slab-use-after-free in hci_sent_cmd_data+0x27c/0x2f0
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
hci_sent_cmd_data+0x27c/0x2f0
hci_le_set_scan_param_sync+0x43a/0x850
hci_passive_scan_sync+0xb09/0x1460
hci_update_passive_scan_sync+0x47c/0x6e0
hci_le_pa_create_sync+0x200/0xa70
hci_cmd_sync_work+0x13c/0x290
Allocated by task 95:
skb_clone+0x13f/0x340
hci_cmd_work+0x2a9/0x7e0
Freed by task 95:
kmem_cache_free+0xba/0x3a0
hci_cmd_work+0x29c/0x7e0
Use hdev->lock to serialize the address snapshot with sent_cmd
replacement. Protect req_skb replacement and completion cleanup with
the same lock because the helper falls back to that skb. Copy the
address before releasing the lock and use the copy for the existing
RCU-protected connection lookup. Release the mutex before sending or
waiting for commands, preserving the lookup and completion ordering. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sock: Serialize dead-device detachment
Rebinding an HCI socket after its controller is unregistered can race
monitor control replay and crash the kernel. hci_sock_bind() clears
hci_pi(sk)->hdev and drops the device reference under only the socket
lock, whereas send_monitor_control_replay() holds hci_sk_list.lock for
reading.
Replay can observe a non-NULL hdev, then bind can clear it and drop the
last reference before create_monitor_ctrl_open() reads hdev->id. This
can cause a NULL pointer dereference if the pointer is reloaded, or a
use-after-free if the old pointer is retained.
The kernel reported:
KASAN: null-ptr-deref in range [0x0000000000000068-0x000000000000006f]
RIP: 0010:create_monitor_ctrl_open+0x579/0x800
Call Trace:
hci_sock_bind+0xd96/0x1190
__sys_bind+0x166/0x200
__x64_sys_bind+0x6d/0xb0
do_syscall_64+0xdd/0x4a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The same missing serialization lets hci_send_to_sock() select a socket
for the old device and queue its frame after bind has detached the socket
or installed a new binding.
Take hci_sk_list.lock for writing when clearing the device pointer and
resetting the socket state. This waits for existing replay and delivery
readers to finish before detachment and prevents later readers from
using the old binding. Keep hci_dev_put() outside the critical section
because the final device release can sleep. |
| Use after free in Windows Installer allows an authorized attacker to elevate privileges locally. |
| PHP has various global state that temporarily points into request memory. In some scenarios, global state may not be correctly reset, or may be repopulated after being reset. The global state may then refer to request memory even after it has been freed. Subsequent requests may read or branch on this stale state before it is fully initialized. Multiple strategies can trigger this condition and produce remote code execution (RCE). |
| PHP uses longjmp() for out-of-memory (OOM) errors to exit the current context and abort handling of the request. Some contexts may not properly account for this scenario and leave request memory in an uninitialized state before performing an allocation. The subsequent request cleanup procedure may read or branch on this memory. Multiple OOM strategies can consistently trigger this condition and lead to remote code execution (RCE). |
| A heap use-after-free in the dasher_flush_segment function (/filters/dasher.c) of GPAC Project/MP4Box before 2.5 allows attackers to cause a Denial of Service (DoS) via supplying a crafted MP4 file. |
| A heap use-after-free in the gf_filter_pid_send_event_downstream function (/filter_core/filter_pid.c) of GPAC Project/MP4Box before 2.5 allows attackers to cause a Denial of Service (DoS) via supplying a crafted MP4 file. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: steam: Rearrange teardown sequence
This fixes a narrow window during the teardown sequence where callbacks
could still be scheduled during cleanup that would then have a dangling
pointer to the now-freed steam struct.
This also puts work canceling for rumble and mode switch in
steam_unregister, as that shouldn't persist while the client hdev is open. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7915: disable rx napi when removing device
Unloading the mt7915e module with a MT7916 triggers multiples WARN in
__netif_napi_del_locked() and in page_pool_disable_direct_recycling()
because the driver does not disable the napi before destroying it.
This is troublesome since on MT7916 it is required to unload the module
and reinsert it with a different enable_6ghz parameter to change the
frequency. The system generally becomes unstable after reinserting the
module.
Fix it by disabling rx napi inside mt7915e itself, even through napi rx is
enabled in the mt76 generic code. Disabling it in the mt76 generic code
was previously attempted and reverted because napi was disabled too
late and rx handlers could access freed structures. Note that the tx
side is enabled and disabled by the mt76 generic code.
It is disabled in mt7915_stop_hardware() since, unlike
mt7915_unregister_device(), is it also called in the probe path if an
error happens after rx napi is enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: protect clcsock lifetime in smc_getname
smc_getname() dereferences smc->clcsock without holding
clcsock_release_lock. Link-group termination can release the CLC socket
through smc_close_active_abort() while the SMC socket is still open,
for example after shutdown(SHUT_WR).
A getsockname() caller can load smc->clcsock, then the termination worker
can clear the pointer and call sock_release() before the caller accesses
clcsock->ops or invokes getname(). This causes a use-after-free; if the
worker clears the pointer before the load, it causes a NULL dereference.
The syscall's file reference keeps the SMC socket alive but does not
prevent asynchronous release of its CLC socket.
KASAN reported the following with test-only timing instrumentation:
BUG: KASAN: slab-use-after-free in smc_getname+0x19e/0x1b0
Read of size 8 at addr ffff888109abb4e0 by task poc/103
Call Trace:
smc_getname+0x19e/0x1b0
do_getsockname+0xe5/0x170
__sys_getsockname+0x8c/0x100
Allocated by task 95:
sock_alloc_inode+0x1e/0x280
sock_alloc+0x3d/0x240
__sock_create+0x7e/0x430
smc_create+0x121/0x240
Freed by task 0:
kmem_cache_free+0xcc/0x340
rcu_core+0x50a/0x1850
Last potentially related work creation:
evict+0x446/0x6c0
smc_clcsock_release+0xa8/0xd0
smc_close_active_abort+0x26a/0x3a0
__smc_lgr_terminate.part.0+0x137/0x2e0
Hold clcsock_release_lock across the pointer check and the getname()
callback to serialize with smc_clcsock_release(). Return -EBADF if the
CLC socket has already been released, preserving the existing peer
state check and the callback's return value otherwise. |
| In the Linux kernel, the following vulnerability has been resolved:
memstick: core: wait for request completion before freeing card
In memstick_alloc_card() and memstick_set_rw_addr(),
wait_for_completion_timeout() is used to wait for device identification
and address configuration requests to complete.
The memstick subsystem does not provide an abort or cancellation
callback in struct memstick_host for in-flight requests. If
wait_for_completion_timeout() expires (for instance, when a USB transfer
or command retry is delayed), memstick_alloc_card() returns an error and
frees the memstick_dev structure via kfree(card).
However, the host controller driver (such as rtsx_usb_ms) is still
running the request asynchronously in worker context. When the transfer
eventually finishes, the driver writes into host->req->data, which
points to memory inside the already freed card structure. This leads to
a KASAN slab-use-after-free write:
BUG: KASAN: slab-use-after-free in ms_read_bytes+0x8fe/0x990
Write of size 1 at addr ffff88813c188079 by task kworker/1:5/5239
Workqueue: events rtsx_usb_ms_handle_req
Call Trace:
ms_read_bytes+0x8fe/0x990 drivers/memstick/host/rtsx_usb_ms.c:450
rtsx_usb_ms_issue_cmd drivers/memstick/host/rtsx_usb_ms.c:477 [inline]
rtsx_usb_ms_handle_req+0x557/0x1a00 drivers/memstick/host/rtsx_usb_ms.c:531
process_one_work+0xac7/0x1b10 kernel/workqueue.c:3396
worker_thread+0x5ef/0xe50 kernel/workqueue.c:3560
kthread+0x373/0x450 kernel/kthread.c:436
Allocated by task 1662:
memstick_alloc_card drivers/memstick/core/memstick.c:383 [inline]
memstick_check+0x2c1/0x10d0 drivers/memstick/core/memstick.c:452
process_one_work+0xac7/0x1b10 kernel/workqueue.c:3396
Freed by task 1662:
kfree+0x20c/0x650 mm/slub.c:6792
memstick_alloc_card drivers/memstick/core/memstick.c:420 [inline]
memstick_check+0x72b/0x10d0 drivers/memstick/core/memstick.c:452
process_one_work+0xac7/0x1b10 kernel/workqueue.c:3396
Host controller drivers (rtsx_usb_ms, jmb38x_ms, tifm_ms, r592) already
implement their own hardware and bus timeouts, and callers in
mspro_block and ms_block already rely on wait_for_completion()
unconditionally.
Replace wait_for_completion_timeout() with wait_for_completion() in
memstick_set_rw_addr() and memstick_alloc_card() so that the card
structure is never freed while an asynchronous request is in flight. |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: don't let a pseudo dentry become the root of a mount
d_alloc_pseudo() hands out dentries for pipes, sockets and other files
that are never anyone's child or parent. They carry DCACHE_NORCU and
dentry_free() frees them right away because no lockless path walk can
ever reach them. That holds as long as such a dentry isn't the root of
a mount. But bind mounting /proc/self/fd/<fd> of such a file does
exactly that.
Most callers of alloc_file_pseudo() put their files on kernel-internal
mounts and may_copy_tree() refuses those. bpf_token_create() doesn't. It
places the token file on the bpffs mount the caller handed it and that
mount is in the caller's mount namespace so the clone goes through:
mount --bind /proc/self/fd/<token> <file>
open_tree(tokfd, "", AT_EMPTY_PATH | OPEN_TREE_CLONE) + move_mount()
__follow_mount_rcu() then loads ->mnt_root of that mount, reads d_seq
and d_flags of the dentry and only then checks mount_lock. The dentry
can be gone by then. The final mntput() of an unmounted parent unhooks
a child that stayed attached to it under mount_lock alone. When the
child's holder does the final put right after that the root is dput()
and freed immediately while a walker that found the mount hashed still
looks at it.
Refuse to clone a mount with a DCACHE_NORCU dentry as its root. Nothing
sensible can be done with a bind mount of a bpf token anyway. |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: check the mounts before reading their parents in pivot_root()
path_pivot_root() reads the parents of new_root and of the caller's root
and checks whether they are shared before it checks that either mount is
in the caller's mount namespace. Only namespace_sem is held. That's fine
for a mount that is in the caller's mount namespace.
But new_root can be a file descriptor to a mount that has been unmounted
and that only the file descriptor keeps alive. If that mount stayed
attached to its parent when it was unmounted nothing pins the parent for
it. The final mntput() of the parent unhooks the children under
mount_lock alone and frees the parent afterwards:
pivot_root() close(fd), last ref on the parent
------------ ---------------------------------
ex_parent = new_mnt->mnt_parent
mntput_no_expire_slowpath()
__umount_mnt(new_mnt)
cleanup_mnt()
call_rcu()
IS_MNT_SHARED(ex_parent)
BUG: KASAN: slab-use-after-free in path_pivot_root+0xf1a/0x1840
Read of size 4 at addr ffff8881047382f8 by task pivot_widen/157
path_pivot_root+0xf1a/0x1840
__x64_sys_pivot_root+0x165/0x190
The same goes for the caller's root via chroot(). Both outcomes of the
check end in EINVAL so nothing but the read itself goes wrong. It's the
same thing commit bb4609405752 ("statmount: read the parent of an
unmounted mount under mount_lock") fixed for statmount().
Check that both mounts are in the caller's namespace before their
parents are read. Every path returns EINVAL either way. |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: queue a mount only once for mount notifications
mnt_notify_add() puts a mount on notify_list. It doesn't check whether
the mount is on the list already. That's fine as long as every mount is
queued at most once per namespace_sem hold. It isn't.
propagate_umount() moves a surviving overmount off a stack of mounts
that are going away and queues it as moved. shrink_submounts() and
mark_mounts_for_expiry() call umount_tree() for several mounts under a
single namespace_sem hold. So the second umount_tree() can take down
exactly the mount the first one reparented, reparent it once more and so
end up queueing it a second time.
The second list_add_tail() cuts the mounts queued in between out of the
list while the head still points at the last of them. notify_mnt_list()
then only visits that one mount and the others are freed after the grace
period with notify_list still pointing at them. Every later mount
operation on the host walks freed memory:
BUG: KASAN: slab-use-after-free in __list_add_valid_or_report
Read of size 8 at addr ffff8881003d57e0 by task notify_dq/162
__list_add_valid_or_report+0x15c/0x1a0
mnt_add_to_ns+0x322/0x890
attach_recursive_mnt.isra.0+0xf2a/0x1a00
path_mount+0x139c/0x1d40
This needs a mount with MNT_SHRINKABLE to bind from. That's what
finish_automount() creates (submounts of NFS, AFS and CIFS and the
tracefs mount below debugfs). Bind mounts inherit the flag. A mount
namespace with a FAN_MARK_MNTNS mark does the rest and root in a user
namespace can have both.
Initialize to_notify in alloc_vfsmnt() and leave a mount alone that is
queued already. mnt_notify() looks at the state the mount has when the
list is drained so a single entry per mount is enough. The move event
for a mount that is unmounted under the same hold is lost. That's fine.
The detach is what matters. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: nv: Fix life cycle of the nested_mmus array
The nested_mmus array holds the shadow page tables that are used when
a guest is running a nested context. These structures are allocated on
VCPU_INIT for whole guest, which implies that they may have to be
relocated as the array grows.
Should a VCPU_INIT occur whilst a vcpu is actively running an L2 and
that the allocation requires relocation, that vcpu will still be
running with a pointer to the previous structure, which will have been
freed.
Fix this by turning the array of structures to an array of pointers,
which is now allocated at VM creation, sized to the absolute maximum
that KVM can handle.
In turn, each VCPU_INIT contributes S2_MMU_PER_VCPU to the pool. No
reallocation is ever performed, and the life cycle of each object is
much clearer:
- the nested_mmus array is allocated in kvm_init_nested(), and freed
in kvm_arch_destroy_vm()
- s2_mmu structures are allocated in kvm_vcpu_init_nested(), and freed
on kvm_arch_flush_shadow_all()
Finally, the freeing of vcpu->arch.vncr_array is made consistent
rather than being done on some failure paths, but not others. |
