| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| darylldoyle svg-sanitizer from 1.0.0 before 1.1.0 contains a regular expression denial of service vulnerability in the image-set pattern of stripRemoteCssTokens() when removeRemoteReferences is enabled. Attackers can submit SVGs with many unclosed image-set tokens to exhaust CPU, or trigger PCRE limits causing sanitize() to throw a TypeError and leave unsanitized content. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring: wake ring pollers for local task_work
With IORING_SETUP_DEFER_TASKRUN completions are queued as local work, and
only become CQEs when the submitter enters the kernel to wait for events.
For an application that finds out via poll() or epoll on the ring fd when
it is time to do that, io_uring_poll() reports EPOLLIN if local work is
pending.
That only helps if the work is there at the time of the call. When
DEFER_TASKRUN was added, io_req_local_work_add() did io_cqring_wake(),
which took care of tasks sleeping in poll() as well. Then polling got a
wait queue of its own, ->poll_wq, and the wake up in
io_req_local_work_add() was replaced by waking the submitter directly.
Since then ->poll_wq is only woken when CQEs are committed, which for
such a ring is done by the very task that is waiting to be told to:
submitter completion
poll(ring_fd)
io_uring_poll() // nothing yet
schedule()
io_req_local_work_add()
// ->cq_wait_nr: nobody waits
// sleeps on
Wake ->poll_wq when the first entry is put on the work list. Like for the
eventfd, that must not be done right away if the work is queued from a
wake up handler, as the chain of wake ups could get back to the wait
queue whose lock is held. Use an RCU callback in that case, with a
reference to the ring. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/mpscq: disable preemption while pushing
A push makes the node the new tail, and then links it to its predecessor.
In between the queue isn't empty, but mpscq_pop() can't get at the node.
The consumers deal with that by trying again, with a cond_resched() in
the loop to give a preempted producer the chance to finish.
cond_resched() doesn't do that if the consumer has a higher priority than
the producer and both have to use the same CPU:
producer (SCHED_OTHER) consumer (SCHED_FIFO), same CPU
io_req_local_work_add()
mpscq_push()
prev = xchg(&q->tail, node)
<preempted> io_cqring_wait()
__io_run_local_work()
again:
cond_resched() // nothing to do
mpscq_pop() // NULL
// work pending, no events yet
goto again
The producer can be any task that is able to queue task_work for the
ring: an io-wq worker, or somebody who sends a message with
IORING_OP_MSG_RING. The consumer spins, holding ->uring_lock, until the
scheduler takes pity on the fair class, which takes about a second with
the default settings of the fair server, and forever without it. The
loops in tctx_task_work_run() and io_cancel_local_task_work() have the
same problem.
Don't allow preemption between the two steps. That bounds the time the
window is open on the CPU of the producer by what interrupts take, and a
consumer that waits for that is on another CPU. The cost is a
preempt_disable()/preempt_enable() pair per push. |
| In handleConnectInternal of RpcServerTrusty.cpp, there is a possible denial of service due to a logic error in the code. This could lead to local denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In updateNotificationChannel of PreferencesHelper.java, there is a possible ui obfuscation issue due to a logic error in the code. This could lead to local denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In InputDispatcher::flushSensor of InputDispatcher.cpp, there is a possible denial of service due to a logic error in the code. This could lead to local denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In multiple locations, there is a possible denial of service due to a logic error in the code. This could lead to remote denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In multiple locations, there is a possible permission bypass due to a missing permission check. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. |
| Improper Check for Unusual or Exceptional Conditions vulnerability in the pattern and patternProperties keywords in lud jsv allows an unauthenticated remote attacker to bypass schema validation via a string that matches a schema regex only after heavy backtracking. JSV.Helpers.RegexExt.bounded_match?/2 runs schema regexes with a backtracking budget but calls :re.run/3 without :report_errors, so a match that exhausts the budget returns the same :nomatch as a real non-match. A key that matches a patternProperties regex is then checked against additionalProperties or not at all, and a string that matches a not subschema with a pattern is accepted. Before the budget existed, Regex.match?/2 failed the same way at Erlang's default match limit.
Only schemas whose regex explores a catastrophic branch before the branch that matches are affected. The attacker controls the data, not the schema, and linear patterns never exhaust the budget.
This issue affects jsv: from 0.1.0 before 0.26.2. |
| Mattermost versions 11.7.x <= 11.7.11 fail to validate null elements when decoding playbook import conditions which allows an authenticated attacker to crash the Playbooks plugin instance-wide via a crafted import request containing a null condition. Mattermost Advisory ID: MMSA-2026-00709 |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/io-wq: don't lose the signal that ends work
When a thread exits, only its tracked requests are cancelled. Then its
io-wq is torn down. io_wq_exit_workers() signals every worker, to get it
out of an interruptible sleep, and waits for all of them to exit. Before
they do, they go through the work that is left. Unbounded work is
cancelled. Bounded work is run, as it is expected to end by itself.
Not all of it does. An open has no file yet, so it counts as bounded, and
the open of a FIFO waits for the other end. That is what the signal is for.
But the workers are signalled once, and a worker that hasn't started the
work by then loses the signal:
io_wq_exit_workers() io_worker_handle_work()
io_wq_worker_wake()
set TIF_NOTIFY_SIGNAL
io_assign_current_work()
io_run_task_work()
clear TIF_NOTIFY_SIGNAL
io_wq_submit_work()
fifo_open()
wait_for_partner()
wait_for_completion_timeout()
The thread never gets out of do_exit():
IORING_OP_OPENAT of a FIFO without a writer, IOSQE_ASYNC
exit of the thread that has submitted it
hangs in more than 9 of 10 attempts (4 CPUs, KVM), until the process is
killed.
Set TIF_NOTIFY_SIGNAL for bounded work that is started with IO_WQ_BIT_EXIT
set. The bit is set before the workers are signalled, and it is tested
after the flag has been cleared, with clear_notify_signal() providing the
barrier. So either the flag stays, or the bit is seen.
Work that is started while the io-wq exits is treated like work that is
being run at that time: it isn't interrupted unless it waits
interruptibly. |
| In Modem, there is a possible information disclosure due to side channel information disclosure. This could lead to remote denial of service, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01879164; Issue ID: MSV-9846. |
| A flaw in the Node.js `zlib.ZipFile` API can cause it to return bytes that do not belong to the requested entry after the local and central header validation fails.
When `zipEntry.modified` is read on an archive whose local header does not match its central directory, either directly or while compacting the archive, the validation error is caught but the parsed local header is left cached without a content offset. A later content read then returns attacker-controlled bytes from the start of the file instead of rejecting the archive, and CRC-32 verification still passes because the attacker controls the central directory CRC. A Node.js-based scanner can therefore approve different content from what another ZIP implementation extracts from the same archive.
This vulnerability affects Node.js **26.x**. |
| PHP has various global state that temporarily points into request memory. In some scenarios, global state may not be correctly reset, or may be repopulated after being reset. The global state may then refer to request memory even after it has been freed. Subsequent requests may read or branch on this stale state before it is fully initialized. Multiple strategies can trigger this condition and produce remote code execution (RCE). |
| PHP uses longjmp() for out-of-memory (OOM) errors to exit the current context and abort handling of the request. Some contexts may not properly account for this scenario and leave request memory in an uninitialized state before performing an allocation. The subsequent request cleanup procedure may read or branch on this memory. Multiple OOM strategies can consistently trigger this condition and lead to remote code execution (RCE). |
| In the RingRTC library before 2.72.0 for Signal, a peer that saturates a call's FSM queue can interfere with the ability of a local hangup to tear the call (with its audio and perhaps also video track) down. |
| SD JWT JS is a JavaScript implementation of the Selective Disclosure JWT (SD-JWT) specification. In version 0.19.0 and earlier, `@sd-jwt/decode`, also used by `@sd-jwt/core`, silently drops a tampered Disclosure whose digest no longer matches the Issuer-signed `_sd` array and returns a reduced claim set, reporting success while the Issuer signature remains valid. Both a tampered Disclosure that remains valid JSON and a Disclosure containing invalid UTF-8 bytes reach this silent-drop behavior. In the latter case, the `TextDecoder / Buffer` decoding path substitutes U+FFFD replacement characters, recovering syntactically valid disclosure data instead of rejecting the malformed input. This violates RFC 9901 section 7.1 step 5, which requires rejection of unreferenced Disclosures, and section 7.1 step 3 / section 4.2.1, which require rejection of invalid Disclosures. A malicious holder can exploit this omission primitive, including through `SDJwtInstance.verify()` when key binding is required. An on-path attacker can also tamper with a Disclosure when the relying party does not enforce key binding; enforced key binding rejects on-path tampering because it invalidates the KB-JWT `sd_hash` binding. If the relying party defaults to allowing access when a constraining age, role, or restriction claim is absent, the silent claim reduction can change an authorization decision without an error. This issue is fixed in `@sd-jwt/core` version 0.20.0; no patched version of the standalone `@sd-jwt/decode` package is identified. |
| Improper Check for Unusual or Exceptional Conditions vulnerability in Drupal Permissions by Term allows Forceful Browsing. This issue affects Permissions by Term versions: from 0.0.0 to 3.1.41. |
| CallBackery versions before 0.62.0 for Perl store user passwords as unsalted HMAC-SHA1 hashes.
Passwords are hashed with hmac_sha1_sum() from Mojo::Util with no key, a single fast SHA-1 HMAC. There is no salt, so equal passwords give equal hashes, and no work factor slows down guessing.
An attacker who obtains the user table can recover passwords by fast offline guessing. |
| OpenVM is a performant and modular zkVM framework built for customization and extensibility. Before 1.7.0 in the 1.x line and in affected 2.0 and 2.1 prereleases, `OpenVmHalo2Verifier.verify` constructs raw proof calldata from user-controlled `proofData`, performs a `staticcall` to `address(this)`, and treats a successful call as proof acceptance. If the first four proof bytes match another external selector exposed by the wrapper, dispatch can invoke a successful non-verifier function instead of the generated Halo2 fallback verifier. Applications using the generated Solidity wrapper can consequently accept arbitrary app commitments and public values without checking the proof suffix, accumulator, app commitments or public values. This issue is fixed in versions 1.7.0, 2.0.0-rc.3 and 2.1.0-preview. |
